Connexions logo
 Solenoid Valves Uk Graphic design
Part Number


Solenoid Valves
graphic design
Port Size - Type
Port Option
Min Pressure
Max Pressure
Body Material
Special Option



graphic design menu
 Valves Home    Technical Data    Seal material Explained 

UK Solenoid Valve supplier Basic Seal Guide.

Solenoid Valve Seal and Diaphragm Material Selection.

Selecting the correct sealing material for your solenoid valve requires an understanding of available sealing materials. Seals are usually the most limiting factor of a solenoid valve. The seal selection should take the following items into consideration:
  • Chemical properties of the media
  • Temperature of the media
  • Pressure to be used
The next sections describe the most common seal materials available for solenoid valves. Usually more than one seal material is available for each valve type.
If you need more detailed information on chemical compatibility please contact us or your chemical supplier directly.  Click Here for our solenoid valve chemical resistance chart.

Solenoid Valve Nitrile Rubber (NBR / Buna-N)

The chemical name for Nitrile rubber is Butadiene Acrylonitrile. However, most commonly it is referred to as NBR or Buna-N. NBR is probably the most common solenoid valve seal material and it is considered the standard material for neutral fluids by many. NBR is also the standard material for O-rings.
NBR can stand media temperatures to approximately 90 degrees Celsius on continuous basis, and higher temperatures intermittently. NBR resists ageing caused by heat very well. However, NBR's resistance to sunlight is very poor. Abrasion and tear resistance of NBR is very good.
NBR seals are most commonly used with the following media:
  • Water
  • Air
  • Different Fuels, Oils, and Gases

NBR has a good resistance to:

  • Aliphatic hydrocarbons
  • Petroleum
  • Fuels
  • Mineral Oil
  • Vegetable Oil
  • Hydraulic fluids
  • Alcohol
  • Many Acids
  • Abrasion

NBR has a poor resistance to:

  • Ozone
  • Acetone
  • Methyl Ethyl Ketone
  • Chlorinated Hydrocarbons
  • Ethers and Esters

In addition to solenoid valve seals, NBR rubber is often used for water pump, carburetor, transmission, hydraulic pump, and hydraulic actuator seals.

Solenoid Valve EPDM Rubber

EPDM stands for Ethylene Propylene Diene Monomer rubber. EPDM solenoid valve seals are well suited for use with hot water due to EPDM's excellent resistance to heat. The maximum service temperature of EPDM is approximately 120 degrees Celsius. EPDM is unsuitable for use with most oils and fuels.

EPDM seals are most commonly used with the following media:

  • Hot /Cold Water, Steam
  • Freon
  • Air

EPDM has a good resistance to:

  • Heat
  • Ozone
  • Oxidizing Chemicals
  • Up to Medium Concentration Acids
  • Alkalis
  • Fireproof hydraulic fluids
  • Many Ketones and Alcohols
  • Sunlight
  • Abrasion and Tearing

EPDM has a poor resistance to:

  • Most Oils and Fuels
  • Hydrocarbons
  • Aromatic and Aliphatic Hydrocarbons
  • Halogenated Solvents
  • Concentrated Acids

Solenoid Valve VitonŽ (FKM)

VitonŽ (FKM) is a brand name for the Fluoroelastomer manufactured by DuPont. It is well know for its excellent heat resistance, making service temperatures nearing 150 degrees Celsius possible.

FKM seals are most commonly used with the following media:

  • Hot Water
  • Acid
  • Alkali
  • Oils
  • Hydrocarbon
  • Salts Solutions

FKM has a good resistance to:

  • Hydrocarbons
  • Many Aggressive Chemicals
  • Diluted Acids
  • Weak Alkalis
  • Mineral Oils
  • Aliphatic and Aromatic Hydrocarbons
  • Chlorinated Hydrocarbons
  • Sunlight
  • Ozone

VitonŽ has a poor resistance to:

  • Ketones
  • Acetone

Solenoid Valve PTFE - Polytetrafluoroethylene

PTFE is a Polytetrafluoroethylene. The most well know trademark of PTFE is DuPont's Teflon. PTFE is practically resistant to all fluids. PTFE is non-elastic, limiting its use in certain applications. PTFE can be used with media reaching very high temperatures 230 degrees Celsius.   
Connexion Developments Ltd have access to many other types of seal material including metal/metal and metal/Resin and FFKM amongst others for more aggressive and demanding applications. 
Please also keep in mind that apart from the dry armature valves in the Connexion Range most valves will have varying grades of stainless steel in contact with the media. i.e. 303 or 302 stainless steel springs, 304 stainless core tube and stainless steel 430F Armature. Please consult us its a free service we provide to help.
Our solenoid valve technical sales team will be happy to help you please call 01454 334990 or Free Phone 0800 808 7799
graphic design
News & Events

3/2 Coax Solenoid Valves


 3/2 coax valves sizes 1/4 to 2" Thread or Flange Click here for Coaxial Valves


2/2 Coax Air Valves

2/2 Coaxial Pneumatic Valves



 Sizes 1/4 to 2" thread and flange Click here for Coaxial Valves


3/2 Coax Air Valves

3/2 Coaxial Pneumatic Valves



 Sizes 1/4 to 2" thread and flange Click here for Coaxial Valves

graphic design