Connexions logo
 Solenoid Valves Uk Graphic design
Part Number

 

Solenoid Valves
graphic design
Media
Port Size - Type
Port Option
N-open/closed
Min Pressure
Max Pressure
Body Material
Protection
Special Option

click
to
search

 

graphic design menu
 Valves Home    Gas Solenoid Valves 

Gas EN161 Approved Solenoid Valves.

Gas EN161 approved solenoid valves are available in both 2/2 way fail safe closed known as auto reset and manual reset gas solenoid valves requiring a manual reset back into open position are manufactured in sizes ranging from 1/8 to 2" thread and flange DN50 to DN300.
It is important to remember that only a Gas Safe Registered engineer can install a gas solenoid valve as the old Gorgi Gas Installers licenses are now invalid.
Gas EN161 solenoid valves are designed to offer guaranteed or positive shut off for low pressure mains and town gas systems up to 200 millibar, 360mBar and 6 Bar and must be installed with the coil upright or vertical to enable positive closing or shut off.
Below is a short list of common gas safety shut off valves.

Gas Solenoid Valve - 1/8 & 1/4 BSP EN161 Gas Auto Reset Solenoid Valves from Stock

Miniature EN161 Gas Solenoid Valves
2/2 way normally closed electrical power to open
 
Port Sizes 1/8" & 1/4" BSP

1/2 to 4

Auto Reset VMR Gas Solenoid Valve Series
2/2 way normally closed electrical power to open
 
Port Thread Sizes 1/2 to  2"BSP
Port Flange Sizes DN65 to DN300
 

Gas Solenoid Valve - Manual Reset EN161 Gas Approved Solenoid Valves

Manual Reset EVRMNCA Gas Solenoid Valve Series
(Gas solenoid Valve stays closed until energised and manually reset into open position.
Gas solenoid valve will only stay in open position whilst energised.
Upon power failure gas solenoid valve will automatically close and stay closed until re-energised and manually reset into open position.
Port Thread sizes 1/2 to 2"BSP
Port Flange sizes DN65 to DN300
 

Gas Solenoid Valve - Manual Reset EN161 Gas Board Approved Solenoid Valve with EexdIICT6 enclosure

Specialist Gas Solenoid Valves Manual Reset ATEX
21/2" DN65 to 8" DN200" 0 - 0.4 Bar DPGR Series
21/2" DN65 - 6" DN150" 0 - 5 Bar KEPB Series
Some custom options include:
Voltages from 12vDC to 380vAC
Protection levels from IP65 to Hazardous Area ATEX EexdIICT6
Open & Closed Position Indication Switches
Twin or Double Coil (protection against single coil failure)
Anti Micro power coil suppression system (power failures under 0.25 seconds valve stays open without requiring resetting)

graphic design
News & Events

Angle seat valves

3 Way Angle Seat Piston Valves

Sizes 1/2 to 1" thread

Normally Open, Closed and Mixing function. 

 Click here for more information

 

3/2 Coax Solenoid Valves

 

 3/2 coax valves sizes 1/4 to 2" Thread or Flange Click here for Coaxial Valves

 

2/2 Coax Air Valves

2/2 Coaxial Pneumatic Valves

 

 

 Sizes 1/4 to 2" thread and flange Click here for Coaxial Valves

 

3/2 Coax Air Valves

3/2 Coaxial Pneumatic Valves

 

 

 Sizes 1/4 to 2" thread and flange Click here for Coaxial Valves

 
 
graphic design